Skip to main content
Loading…
This section is included in your selections.

(1) General Application of Standards. Transportation facilities shall be located and constructed to standards at EC 9.6505 and EC 9.6800 through 9.6875, unless otherwise specified herein. In the event of a conflict between standards, the specific standards at EC 9.3160 shall control.

(2) Transportation Network. The Street Connectivity Standards at EC 9.6815 do not apply in the S-DR Zone. The location of streets, alleys, public accessways, and multi-use paths shall be consistent with Figure 9.3160(4), S-DR Zone Street Network.

(3) Street Classifications. Except for alleys and public accessways, all streets in Figure 9.3160(4), S-DR Zone Street Network, are classified as public local commercial-industrial streets.

(4) Design Standards. The Street Width Standards at EC 9.6870 do not apply in the S-DR Zone. Street standards shall be determined using Figure 9.3160(4), S-DR Zone Street Network, and the following:

(a) Street right-of-way width shall be a minimum of 62 feet for Street Type 1; 57 feet for Street Type 2; 40 feet for Street Type 3; and 50 feet for Street Type 4 and Street Type 5. For examples, see Figures 9.3160(4)(a) through (e).

(b) Street travel lane width shall be a minimum of 10 feet for all Street Types and all Street Types shall contain a minimum of two travel lanes. See Figures 9.3160(4)(a) through (e).

(c) Combined pedestrian area width, including planters and green infrastructure, in accordance with EC 9.3145(7)(d), shall be a minimum of 13 feet on both sides for Street Type 1; 9 feet on one side and 12 feet on the other side Street Type 2; 10 feet on both sides for Street Type 3; and 15 feet on both sides for Street Type 4 and Street Type 5. See Figures 9.3160(4)(a) through (e).

(d) Alleys shall have a minimum pavement width of 20 feet and a maximum pavement width of 26 feet.

(e) Public accessways shall have a minimum pavement width of 12 feet.

(f) Multi-use paths shall have a minimum pavement width of 10 feet and a maximum pavement width of 20 feet.

(5) Design Review. As an alternative to compliance with (2) or (4) above, an applicant may apply for approval of an alternative through the Design Review process in accordance with the provisions of EC 9.3190.

Figure 9.3160(4) S-DR Zone Street Network

Figures 9.3160(4)(a) S-DR Zone Street Type 1

Street section and plan diagrams are conceptual and for reference purposes only.

Figures 9.3160(4)(b) S-DR Zone Street Type 2

Street section and plan diagrams are conceptual and for reference purposes only.

Figures 9.3160(4)(c) S-DR Zone Street Type 3

Street section and plan diagrams are conceptual and for reference purposes only.

Figures 9.3160(4)(d) S-DR Zone Street Type 4

Street section and plan diagrams are conceptual and for reference purposes only.

Figures 9.3160(4)(e) S-DR Zone Street Type 5

Street section and plan diagrams are conceptual and for reference purposes only.

(Section 9.3160, including 9.3160 Figures, added by Ordinance No. 20513, enacted July 8, 2013, effective August 9, 2013; amended by Ordinance No. 20619, enacted July 22, 2019, effective August 25, 2019.)